BLXXQ - PUTRESCINE DIHYDROCHLORIDE CELL CULTURE TES
- MSDS: BLXXQ
- Manufacturer: SIGMA CHEMICAL CO
- Product Name: PUTRESCINE DIHYDROCHLORIDE CELL CULTURE TES
- National Stock Number: 6810-00N021627
Product Identification
Product ID:PUTRESCINE DIHYDROCHLORIDE CELL CULTURE TES
MSDS Date:07/14/1989
FSC:6810
NIIN:00N021627
MSDS Number: BLXXQ
Responsible Party
US
Emergency Phone: 314-771-5765
Info Phone: 314-771-5765; 800-325-8070
Cage: 21076
Contractor
Telephone: 314-771-5765
Cage: 21076
Ingredients
1,4-BUTANE DIAMINE, DIHYDROCHLORIDE; (PUTRESCENE
CAS: 333-93-7
RTECS: EJ7280000
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MAY BE HARMFUL BY INHALATION,
INGESTION, OR SKIN ABSORPTION. CAUSES EYE AND SKIN IRRITATION.
MATERIAL IS IRRITATING TO MUCOUS MEMBRANES AND UPPER RESPIRATORY
TRACT. THE CHEMICAL, PHYSICAL, AND TOXICOL OGICAL PROPERTIES HAVE
NOT BEEN THOROUGHLY INVESTIGATED.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYE:FLUSH WITH COPIOUS AMOUNTS OF WATER FOR AT LEAST 15
MINUTES. SKIN:WASH WITH SOAP & COPIOUS AMOUNTS OF WATER. INHAL:
REMOVE TO FRESH AIR. IF NOT BREATHING GIVE ARTIFICIAL RESPIRATION.
IF BREATHING IS DIFFICULT, GIVE OXYGEN. CALL MD. WASH CONTAMINATED
CLOTHING BEFORE REUSE. INGEST:CALL MD IMMEDIATELY .
Fire Fighting
Extinguishing Media:WATER SPRAY, CARBON DIOXIDE, DRY CHEMICAL POWDER,
ALCOHOL OR POLYMER FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:EMITS TOXIC FUMES UNDER FIRE CONDITIONS.
Accidental Release
Spill Release Procedures:WEAR RESPIRATOR, CHEMICAL SAFETY GOGGLES,
RUBBER BOOTS AND HEAVY RUBBER GLOVES. SWEEP UP, PLACE IN A BAG AND
HOLD FOR WASTE DISPOSAL. AVOID RAISING DUST. VENTILATE AREA AND
WASH SPILL SITE AFTER MATER IAL PICKUP IS COMPLETE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN A COOL, DRY PLACE. KEEP
TIGHTLY CLOSED. IRRITANT. DO NOT BREATHE DUST. DO NOT GET IN EYES,
ON SKIN, ON CLOTHING.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation:MECHANICAL EXHAUST REQUIRED.
Protective Gloves:RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:SAFETY SHOWER AND EYE BATH.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:N1
Melt/Freeze Pt:M.P/F.P Text:536F,280C
Appearance and Odor:WHITE POWDER
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CO, CO2, NOX, HCL GAS.
Disposal
Waste Disposal Methods:DISSOLVE OR MIX THE MATERIAL WITH A COMBUSTIBLE
SOLVENT AND BURN IN A CHEMICAL INCINERATOR EQUIPPED WITH AN
AFTERBURNER AND SCRUBBER. OBSERVE ALL FEDERAL, STATE, AND LOCAL
LAWS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.